The only Infrared gas imaging camera certified and classified for Hazardous Locations:
ATEX, UL, ANSI & CSA
Utilizing certified equipment for use in hazardous location allows a higher level of safety and operability confidence. It increases operator’s efficiency as it eliminates the need for getting a “hot permit” before entering the inspection area.
EyeCGas Certifications:
| Hazardous Locations | UL1604 – Electrical Equipment for Use in Class I and II, Division 2, and Class III (Classified) Locations. Third edition. | |
| CSA C22.2 No. 213-M1987 – Non-Incendive Electrical Equipment for Use in Class I, Division 2 Hazardous Locations. First edition. | ||
| ANSI/ISA-12.12.01 – Non-incendive Electrical Equipment for Use in Class I and II, Division 2, and Class III Hazardous (Classified) Locations. 2011 edition. | ||
| ATEX II 3G Ex nL IIC T6 – EN600079-0 Electrical apparatus for explosive gas atmospheres – Part 0: General requirements. EN60079-15 Electrical apparatus for explosive gas atmospheres – Part 15: Construction, test and marketing of type protection “n” electrical apparatus. |
||
| Encapsulation | IP65-Blowing Dust test – MIL-STD-810F, Method 510.4, Procedure I | |
| IP65 – Jetting Water | ||
| Vibration | 2.4 GRMS Random Vibration – Mil Std 810F 514.5 | |
| Temperature and Humidity | IEC 60068-2-30 Temp. +25°C / +40°C Humidity 95% RH 3 Cycles of 24 Hours (12+12h cycle). | |
| EMC | EN 610000-6-4 : 2007 class A – Radiated Emissions | |
| EN 610000-6-2 :2005 class A – Immunity to Electrostatic Discharge (ESD) | ||
| EN 610000-6-2: 2005 class A Radiated Immunity to Power Frequency magnetic field | ||
| FCC 47 CFR part 15 subpart B -Radiated Emissions | ||
| EN 610000-6-2 :2005 class A Radiated Immunity to RFE | ||
| EN60950-1:2006 | ||
| HALT – High Accelerated Life Test | 20 GRMS Vibration level, 8 temp cycles for 4 hours, 60˚C/min temp change rate. | |
| Max temp : 55˚C, Min temp : -20˚C | ||
| Certification Data when packed inside the carrying case | ||
| Bump | ASTM-D 4169-06 Schedule A – Packed. Drop Height 61 cm. | |
| 1 drop on each face. Total Drops 6 | ||
| Loose cargo vibration Test | ASTM-D 4169-08 Schedule F Test method D999 | |
| Vibration | ASTM-D 4169-08 Schedule E Test Method D4728 – 0.73 GRMS 1 hr each of three axes | |